Wall mount dip station with vertical knee enhance

(8 customer reviews)

$170.32 $166.56

  • make sure this suits by means of entering your model wide variety.
  • compound body weight exercises: the dip and vertical knee boost station brings 3 pinnacle sports to your fitness center for top notch full body workouts. Dips and assisted pull u. S. A. For your shoulders, again, chest and center, and knee raises to your decrease abdominals.
  • smooth installation: set up is easy for homes with 16inch on-center studs. Health club first-class fully braced all metal frame helps up to 350lbs. Best for domestic gyms of any size with mounting hardware and united states of america tech assist blanketed.
  • brief metabolic blast: your metabolism turns on when you paintings your most important muscle groups in compound actions. A brief consultation with dips, knee raises and assisted pull united statesswitches your metabolism on for all day fats burning and herbal electricity.
  • the supported abs workout: update sit u. S. With knee raises – the absolutely supported manner to goal the lower abdominals. Angled handles, contoured lumbar help pad and forearm pads maintain your awareness on form for the fastest effects on the way you appearance and move.
  • new white powder coat frame: the new vertical knee raise station compliments the appearance of your gymnasium with a excessive comparison white powder coat frame over premium satisfactory black vinyl padding and hardware. Wall mount preserves your open area for ground physical activities.
SKU: C19Z078HX0572 Category:

from the producer

three of the best compound bodyweight exercises

your metabolism kicks into overdrive when compound bodyweight sports interact your most important muscle systems in your higher and decrease frame and middle – despite very quick workouts. The dip and vertical knee increase station by final body press offers you open get entry to to dips, assisted pull ups, and knee increases to build functional muscle rapid and puts you in overall control of your metabolism. If you are severe about results and need fitness center fine workout routines at home, bolt the dsvkr by means of closing frame press on your wall.

replace take a seat u. S. With completely supported vertical knee increases

when you have hit a plateau together with your lower stomach consequences, you’ll be held again by way of the restrictions of the sit-up position. With a contoured lumbar pad, thick forearm pads, and canted handles the dsvkr aligns your posture and frees your hips and legs for complete range of motion knee increases. Taking unnecessary strain from your decrease stomach workout routines means you may dig deeper into every set with greater attention and endurance. The dsvkr brings new results to your decrease abdominals and you’re going to love how you look and pass.

installs without difficulty with preferred sixteen inch ‘on-middle’ framing

the wall mount dip and vertical knee enhance station is designed and supported in the usa. Closing frame press is a north carolina corporation committed to your satisfactory workouts. We construct the equipment we need to apply and assume you may like the effects. Your dsvkr comes complete with meeting and set up hardware, entire commands and usa tech help.

approximately ultimate frame press

our ardour is presenting health gadget that helps you to get the maximum out of your exercises every day. By means of producing excessive pleasant low-priced products that appearance notable and function past expectation we are able to create a rewarding area for your life for exercise and help you reach new stages of health, well being and private performance.

we value your health and are proud to serve your fitness center needs. Closing frame press health equipment is backed with u. S. Tech support.



8 reviews for Wall mount dip station with vertical knee enhance

  1. Brian

    I’ve checked out a few other ab/dip stations online and took a gamble on this one…and I’m glad I did. I preferred a wall-mounted product to save floor space in my basement home gym. I mounted it into a poured concrete wall using some 3/8 x 4” lags with shields. I broke one of the included lags so I purchased some higher grade ones for this project. I’m confident that the included lag bolts would be sufficient for mounting into wood studs, but I went with some stronger ones for concrete mounting. The whole thing feels sturdy and well-built. After trying out a few leg raises and dips, I tested it by doing some weighted dips with a 45 lb bumper plate (see attached pics). I’m 5’10”, 205 lbs and I feel confident that this thing could easily hold 300 lbs. I’m very satisfied so far, and my wife is too as she uses it for ab work. Strongly recommended. Read more

  2. Lance P. Rhodes

    I was weary about purchasing this product, as many other customers complained that the parts did not assemble correctly. I had it 90% installed when I discovered that the vertical handle grip was not machined correctly and could not thread the bolt. The seller was unable to send me a replacement part, but did (satisfactorily) provide a partial refund. I contacted the manufacturer directly, and they were more than happy to send a replacement part free of charge. It is now installed and fully functional. I am not marking the product down due to customer service issues. Both parties were great and handled my problem appropriately. However, even though the product was marked “new” and came fully packaged, it has several scratches and gashes in the paint, most likely due to machining. The paint job looks like it was dropped and run along a cement floor. Also, the padding is very cheap. It looks like it was stapled on in a sweat shop and will most likely tear off after repeated use. But it seems to work great for my simple workout. The wall studs and drywall seem to be holding, even for the extended vertical pushups. (For references, I weigh about 140 pounds.) Read more

  3. Joe

    Comfortable size and decent padding. It came in the box with a few scratches. Was easy to assemble. Does a great job of providing a good dip station without using floor space. Be aware however, I found that mounting this to a finished wall (Sheetrock) it needed to be mounted to a more solid support. I used 2×4’s and went and got longer lag screws (8). This made it as solid as a rock. At 195 pounds, and 215 pounds in full uniform, I was doing dips without an issue on this. Read more

  4. Micah B.

    I read some of the reviews left by others before purchasing this dip station, so I was aware that it might have some issues straight out of the box. Unfortunately this was the case with the one I ended up getting. The support bracket (The part that attaches to the wall separately from the back/main apparatus and supports the bottom of the arm rests; see photo) did not fit the arm rests, making mounting impossible without me bending the part by are least an inch. I’ve contacted customer support and will update once I get a response and am actually able to use the item. Update: upon emailing customer support they requested I send my address and then sent the part without question or verification, with it promptly arriving three days later. The new part fits well and I’ve since assembled and used the station, happy to say it feels very sturdy and comfortable. Padding is very firm (But still comfortable) and seems to hold up well after extensive use. Read more

  5. Jeff Kackley

    I don’t have the room for gym equipment in my house so I needed something I could put in my unfinished storage room that takes minimal space. The instructions and hardware it came with were to mount it on a framed wall but it worked out great on a concrete wall with a bit of work. I ended up buying two 3/8″x5″ wedge anchors for the top bar. Had to drill the holes on the frame to be slightly larger than the original 5/16″ but I couldn’t find wedge anchors in 5/16″ and wanted the extra strength that wedge anchors provide. Then I used two tapcon 3/16″x4″ fasteners for the support bracket with a stack of washer between the bracket and wall to make up for uneven surface. Go slow with the tapcon and don’t use a ratchet or you’ll snap the head off the screw like I did. After everything was said and done it’s incredibly sturdy, doesn’t move or creak at all and feels solid. I’m actually even missing a screw on the support bracket since I snapped the head off and can’t get it out, but it’s still extremely solid. The unit is well built, the pads are made well and it feels right to use. It’s great to not take up floor space. Read more

  6. Amazon Customer

    I’ve set up my home gym in my garage. Apart from it having to be functional, it also needed to use as little space as possible (I like to park my cars in there). This dip station fit the bill quite nicely as it is very compact. It is very sturdy when mounted properly and seems to be well built. My only gripe is that I wish the handles were made of a wider diameter tubing. Depending on how big your hands are and how much you weigh, you may feel that the handles can dig in to your palms. Overall though, I would definitely recommend this product. Read more

  7. Happy mommy

    I went way overboard installing it to my wall in my garage, but it is very solid and I can get dips and leg pull ups all day. plus my kids now have something to hang on. The instructions were a little confusing because they mis-labeled a bolt length for the pads VS the arm bracket to the support frame, but once I figured that out it was ok. Read more

  8. jinmandroid

    This dip station is completely rock solid, no sway or movement of any kind. The wall mounting certainly lends to it’s sturdiness, as well as utilitarian good looks. Leg raise configuration feels perfect, and hand position for dips is spot on. Minor gripes; the slightly small dip grip handles cut into your hands a bit, and the installation instructions weren’t the best. Both easily overcome. Otherwise, this is my perfect dip station. Read more

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart